The Process of removing dissolved salts from water, thus producing fresh water from seawater or brackish water process of removing dissolved salts from water, thus producing fresh water from seawater or brackish water.
Desalination is a natural continuous process, which is essential for the water recycling. If we were to consider rain or snowfall on ground, which finally flows either into the sea or goes back to the atmosphere through evaporation or percolates into the sub-soil, is a process of natural desalination. Living beings use this water directly from rain or from river, lakes or springs. When the surface water travels down towards the sea it dissolves minerals and other materials and becomes salty. Once it flows into the oceans, natural evaporation removes part of the water into the atmosphere as clouds, while remaining water available in the ocean becomes very salty. The evaporated water from the ocean is restored back to the earth in the form of rain or snow, which again goes back to the ocean and the cycle, continues.
The world has total of 1.65 billion km3 of water. However, only 0.3 of the total quantity is theoretically useable as fresh water and only 10% of the quantity, that 0.03% is capable of economical utilization. Shivsu Canadian Clear has driven its R&D to build water treatment plants for sea water desalination with its in? house high efficient maximum recovery RO sea water desalination plants world wide with option of containerized desalination plants as well as on site plants.
- Improved water security by supplementing available water resources with quality fresh water
- Ensures compliance with all relevant drinking water standards
- Maximum return on investment coupled with eliminating the need to import fresh water. A huge cost-saving.
- Guarantees a secure water supply during droughts and in arid locations
- Reduced carbon footprint and lower operating costs through energy recovery via the high-pressure membrane process
Aman Water Tech clear our Research and Development wing have worked to design, develop, manufacture complete Water Treatment and Purification System. For the last four decades aman water tech india has successfully designed, manufactured, installed and commissioned a number of Water Treatment Plants with Indigenous and foreign technical know-how to prime industries, fertilizers, hospitals, Government and semi-Government organization, off-shore oil rigs, refineries, soft drink manufacturers, breweries and mineral water manufacturers for various applications.
This is precisely the reason why more than 80% of desalination plants are located in the water scarce Middle East region. Unequal water distribution also exists within our country and fresh water desalination technology is getting concentrated more on water scarce areas such as Gujarat, Tamil Nadu and Rajasthan. Besides producing desalted water for human consumption and industrial requirement these technologies are also found to be advantageous in the recovery of water from waste streams.
Aman Water Tech are now occupied in the development and promotion of sea water desalination technologies such as evaporation, reverse osmosis process, and in particular it consumes the least amount of energy with the application of the state-of-the-art technology, (i.e.) Energy recovery booster system or pressure ex-changers system and is easy to operate and maintain. It is the most sought after technology for desalination of sea or saline water.
All sea water desalination units utilize the state-of-the-art’s latest generation sea water compatible thin film composite polyamide membranes. The Reverse Osmosis block is built as a compact and rugged skid with aesthetic piping. We offer an option of stainless steel / FRP housing for the membranes. The piping for the RO systems is available in normal SS 304 / SS 316 to higher versions like electro-polished stainless steel for specific applications.
The sea water desalination system incorporates a standard turbo-based energy recovery device to achieve maximum energy saving. The turbo-based energy saving device is coupled with the high pressure booster pumps and comes in a sea water compatible duplex stainless steel material of construction. All wetted parts for the pumps and the turbo device have been tested and proven under severe operating conditions in sea water desalination all over the world.
The basic versions are offered with a manual option with online monitoring instrumentation with all safety interlocks. A completely pre-wired control panel and an electrical switch gear panel. The basic versions can be easily upgraded to a high level of automation with either a PLC based control system or SCADA based control system.
We are engaged in manufacturing and supplying of FRP vessels which are ideal for different water treatment products. Our range of FRP vessels are manufactured by Wave Cyber, a leader in membrane & FRP Pressure vessels in the world.
Belt filter presses are used to remove water from liquid wastewater residuals and produce a non-liquid material referred to as “cake”. Dewatered residuals, or cake, vary in consistency from that of custard to moist soil.